The 7 Best Well Pumps of 2026

Why We Chose This Product:

The Red Lion RJS-100-PREM combines heavy-duty cast iron construction with a dual-voltage motor that adapts to 115V or 230V power supplies. It delivers 23 GPM and 65 PSI, maintaining steady household water pressure across multiple faucets without dropping flow.

Who Is It For:

Homeowners with water tables under 25 feet deep who need continuous high water pressure for domestic plumbing and lawn sprinklers. If your well depth exceeds 25 feet, opt for a deep well submersible unit instead.

Why We Chose This Product:

This pump delivers an impressive 33 GPM flow rate at an economical price point while eliminating the hassle of wiring an external control box. Its built-in capacitor and 2-wire setup simplify installation for deep well water systems.

Who Is It For:

Property owners with 4-inch or larger well casings needing high volume water delivery for residential use or agricultural storage tanks. Pick a 3-wire unit if you prefer servicing electrical controls above ground.

Why We Chose This Product:

The RL22G10-3W2V pairs a 260-foot max lift head with an included external control box, meaning capacitor replacements take minutes above ground rather than requiring expensive well pulling. Its NSF/ANSI 372 lead-free certification guarantees clean drinking water safety.

Who Is It For:

Homeowners with deep wells down to 260 feet who prioritize long-term serviceability and certified safe drinking water. Choose a 2-wire model if you want to avoid mounting a control box on the wall.

Why We Chose This Product:

Its convertible design handles both single-pipe shallow wells and two-pipe deep wells up to 90 feet using the included ejector kit. This flexibility lets homeowners adjust setup configuration as local water tables fluctuate without buying a new pump.

Who Is It For:

Properties where well water depth falls between 25 and 90 feet and versatile surface installation is required. If your water table stays strictly under 25 feet, a dedicated shallow jet pump is simpler to plumb.

Why We Chose This Product:

Engineered specifically for high-head performance, the RL12G10-3W2V lifts water up to 434 feet with steady output pressure. The 12 GPM rate is calibrated to maintain household pressure from deep wells without over-taxing lower-yielding aquifers.

Who Is It For:

Homes with deep wells down to 300+ feet that require maximum water pressure head over high volume flow. If you need to run high-volume irrigation sprinklers, choose a 22 or 33 GPM pump instead.

Why We Chose This Product:

Unlike standard top-intake submersibles that lose prime when water levels drop, the WASSERMANN draws from the bottom to drain holding tanks nearly dry. Its 32 GPM pump rate quickly empties rainwater collection and septic effluent systems.

Who Is It For:

Cisterns, rain holding tanks, and low-standing shallow wells where water needs to be pumped down to the floor. If pulling from a narrow drilled well with heavy bottom mud, top-intake pumps prevent sediment clogging.

Why We Chose This Product:

This all-in-one package includes a 1.6 HP jet pump, pre-charged 5-gallon expansion tank, and pressure switch ready out of the box. It quickly boosts pressure for garden hoses and lawn sprinklers without buying extra tank components.

Who Is It For:

Lawn sprinkler setups, garden watering grids, and cabin pressurized water systems needing a self-contained booster pump. For main house installations, pair with a larger separate pressure tank.